LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2015 >> Outback 2.5i >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (H4DO) >> Oil Control Solenoid >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Oil Control Solenoid: Removal

  1. Disconnect the ground terminal from battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>
  2. Remove the air intake duct. (RH side only) <Ref. to REMOVAL , Air Intake Duct.>
  3. Disconnect the connector (A) from the intake oil control solenoid, and remove the intake oil control solenoid from the chain cover.
    • RH side
      Fig 1: Identifying Intake Oil Control Solenoid Connector - RH Side
      G10262168Courtesy of SUBARU OF AMERICA, INC.
    • LH side
      Fig 2: Identifying Intake Oil Control Solenoid Connector - LH Side
      G10262169Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals