System Operation Check Mode: Operation
CAUTION:
After executing the system operation check mode, execute the Clear Memory Mode. <Ref. to
OPERATION , Clear Memory Mode.>
NOTE:
For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".
| Item | SSM display | Execution condition | ||||
|---|---|---|---|---|---|---|
| Activating the actuator ON/OFF | Activating the fuel pump ON/OFF | Fuel Pump | ON ←→ OFF | Ignition switch is ON (engine OFF) | ||
| Activating the purge control solenoid valve ON/OFF | CPC Solenoid Valve | ON ←→ OFF | ||||
| Activating the radiator fan relay ON/OFF | Radiator Fan Relay | ON ←→ OFF | ||||
| Activating the ELCM switching valve ON/OFF | ELCM switching valve | ON ←→ OFF | ||||
| Activating the ELCM vacuum pump ON/OFF | ELCM pump | ON ←→ OFF | ||||
| Fuel pump control | Fuel pump OFF operation | OFF drive | OFF | At idling | ||
| Fixing the timing of idle ignition | Fixed Idle Ignition Timing | 16.0° | At idling | |||
| Idle speed control | Idle Speed Control | 500 - 2000 rpm | At idling | |||
| Injector control | Stopping fuel injection (Cylinder selection) |
Injection Stop Mode | Injector 1 Injector 2 Injector 3 Injector 4 Injector 5 Injector 6 |
At idling | ||
| Fuel injection amount control (All cylinders) |
Injection Quantity Control | -13 - 20% | At idling(1) | |||
| EGR control valve control | EGR Valve Control | 0 - 255 STEP | At idling | |||
| Alternator control | Alternator control | Low mode Middle mode High mode ExHigh mode |
At idling | |||
| Compression measurement | Compression monitor | - |
|
|||
|
||||||