Crankshaft Position Sensor: Removal
- Remove the collector cover. <Ref. to
REMOVAL
, Collector Cover.>
- Disconnect the ground terminal from battery sensor. <Ref. to
BATTERY
, NOTE, Note.>
- Remove the intercooler. <Ref. to
REMOVAL
, Intercooler.>
- Remove the throttle body. <Ref. to
REMOVAL , Throttle Body.>
- Remove the bolts securing the engine harness.
Courtesy of SUBARU OF AMERICA, INC.
- Disconnect the connector (A) from the crankshaft position sensor, and remove the crankshaft position sensor from the cylinder block.
Courtesy of SUBARU OF AMERICA, INC.