Engine Wiring Harness: Removal
- Disconnect the ground terminal from battery sensor. <Ref. to
BATTERY
, NOTE, Note.>
- Remove the intake manifold. <Ref. to
REMOVAL , Intake Manifold.>
- Remove the fuel insulator. <Ref. to
REMOVAL , Fuel Insulator.>
- Remove the engine control module (ECM). <Ref. to
REMOVAL , Engine Control Module (ECM).>
- Disconnect the connector from the engine.
- Structural diagram 1
Courtesy of SUBARU OF AMERICA, INC.
- Structural diagram 2
Courtesy of SUBARU OF AMERICA, INC.
- Remove the engine wiring harness.
Courtesy of SUBARU OF AMERICA, INC.