Intake Side

Disconnect the ground terminal from battery sensor. <Ref. to BATTERY , NOTE, Note.>
Remove the air intake duct. (RH side only) <Ref. to REMOVAL , Air Intake Duct.>
Disconnect the connector (A) from the oil control solenoid, and remove the oil control solenoid from the chain cover.
- RH side
  
  Fig 1: Identifying Oil Control Solenoid Connector With Bolt (RH Side)
  Courtesy of SUBARU OF AMERICA, INC.
- LH side
  
  Fig 2: Identifying Oil Control Solenoid Connector With Bolt (LH Side)
  Courtesy of SUBARU OF AMERICA, INC.