Tumble Generator Valve Assembly: Removal

NOTE: The tumble generator valve assembly is tightened together with the intake manifold.

Disconnect the ground terminal from battery sensor. <Ref. to BATTERY , NOTE, Note.>
Remove the intake manifold. <Ref. to REMOVAL , Intake Manifold.>
Remove the air intake adapter from the cylinder head.
- RH side
  
  Fig 1: Locating Air Intake Adapter Bolts (RH Side)
  Courtesy of SUBARU OF AMERICA, INC.
- LH side
  
  Fig 2: Locating Air Intake Adapter Bolts (LH Side)
  Courtesy of SUBARU OF AMERICA, INC.
Remove the cylinder head plate from cylinder head.

Fig 3: Locating Cylinder Head Plate
Courtesy of SUBARU OF AMERICA, INC.