Check Motor Unit
- Turn the ignition switch to OFF.
- Disconnect the connector from power steering unit.
- Using a tester and test harness, check the internal resistance of the harness terminals.
Preparation tool:
Circuit tester
| Between connector and terminal | Standard |
|---|---|
| (PS2) No. 1 - No. 2 (PS2) No. 1 - No. 3 (PS2) No. 2 - No. 3 |
Less than 10 Ω |
| (PS2) No. 1 - Steering gearbox body (PS2) No. 2 - Steering gearbox body (PS2) No. 3 - Steering gearbox body |
1 MΩ or more |