LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Reverse Check Cable >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Reverse Check Cable: Removal

  1. Disconnect the ground cable from battery.
  2. Remove the gear shift knob by turning it counterclockwise.
  3. Remove the console box assembly. <Ref. to REMOVAL , Console Box.>
  4. Remove the cover - shift lever. <Ref. to REMOVAL , Console Box.>
  5. Remove the panel center LWR LH and RH. <Ref. to REMOVAL , Console Box.>
  6. Remove the clamp.
    Fig 1: Identifying Reverse Check Cable
    G10267853Courtesy of SUBARU OF AMERICA, INC.
  7. Remove the boot and insulator assembly.
    Fig 2: Identifying Boot And Insulator Assembly
    G10267854Courtesy of SUBARU OF AMERICA, INC.
  8. Remove the spring pin from the slider.
    Fig 3: Identifying Spring Pin And Slider
    G10267959Courtesy of SUBARU OF AMERICA, INC.
  9. Remove the slider and spring.
    Fig 4: Identifying Spring And Slider
    G10267960Courtesy of SUBARU OF AMERICA, INC.
  10. Cut the band clip, and separate the reverse check cable from the gear shift lever.
    Fig 5: Locating Band Clip
    G10267874Courtesy of SUBARU OF AMERICA, INC.
  11. Lift up the vehicle.
  12. Remove the center exhaust pipe (rear). <Ref. to REMOVAL , Center Exhaust Pipe.>
  13. Remove the center exhaust cover.
    Fig 6: Identifying Cable Plate And Reverse Check Cable
    G08550630Courtesy of SUBARU OF AMERICA, INC.
  14. Remove the crossmember. <Ref. to REMOVAL , Transmission Mounting System.>
  15. Remove the snap pin and washer, and separate the reverse check cable.
    Fig 7: Identifying Snap Pin, Washer And Reverse Check Cable
    G10267963Courtesy of SUBARU OF AMERICA, INC.
  16. Move the transmission to the right side, and remove the stay bolts and the reverse check cable.
    NOTE: If the transmission is not moved aside, the stay bolts may contact the body and cause damage.
    Fig 8: Identifying Stay Bolts And Stay
    G10267964Courtesy of SUBARU OF AMERICA, INC.
  17. Lift up the stay clip, and separate the stay from the reverse check cable.
    Fig 9: Identifying Clip And Reverse Check Cable
    G10267965Courtesy of SUBARU OF AMERICA, INC.
  18. Pull out the reverse check cable from underside of the vehicle to remove it.
    NOTE: Be careful not to damage the inner boot.
  19. Loosen the lock nut, and remove the reverse check cable from the cable plate.
    Fig 10: Identifying Cable Plate And Reverse Check Cable
    G10267966Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals