Select Cable: Removal

Shift the select lever to "N" range.
Disconnect the ground terminal from battery sensor. <Ref. to BATTERY , NOTE, Note.>
Lift up the vehicle.
Remove the center exhaust pipe (rear). <Ref. to REMOVAL , Center Exhaust Pipe.>
Remove the center exhaust cover.

Fig 1: Identifying Center Exhaust Cover
Courtesy of SUBARU OF AMERICA, INC.
Remove the snap pin and washer from the shifter arm.

Fig 2: Identifying Snap Pin, Washer And Shifter Arm
Courtesy of SUBARU OF AMERICA, INC.
Remove the plate assembly.

Fig 3: Identifying Plate Assembly And Select Cable
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the cable from arm COMPL.

Fig 4: Identifying Arm Compl And Adjusting Nut
Courtesy of SUBARU OF AMERICA, INC.
Raise the claw of clamp and remove the cable.

Fig 5: Identifying Clamp Claw
Courtesy of SUBARU OF AMERICA, INC.
Remove the select cable from plate assembly.