LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2016 >> BRZ Series.HyperBlue >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (Service Information) >> Camshaft Timing Oil Control Valve Assembly (Fa20) >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Camshaft Timing Oil Control Valve Assembly (Fa20): Installation

  1. Installation of camshaft timing oil control valve assembly (bank 2 exhaust side)
    1. Install the back-up ring to the camshaft timing oil control valve assembly.
    2. Apply engine oil to new O-ring, and attach it to the camshaft timing oil control valve assembly.
    3. Using 2 bolts, install the camshaft timing oil control valve assembly.

      Standard value: T=6.4N.m {65kgf.cm} {4.7ft.lbf}

    4. Connect the connector for camshaft timing oil control valve assembly.
  2. Installation of camshaft timing oil control valve assembly (bank 2 intake side)
    1. Install the back-up ring to the camshaft timing oil control valve assembly.
    2. Apply engine oil to new O-ring, and attach it to the camshaft timing oil control valve assembly.
    3. Using 2 bolts, install the camshaft timing oil control valve assembly.

      Standard value: T=6.4N.m {65kgf.cm} {4.7ft.lbf}

    4. Connect the connector for camshaft timing oil control valve assembly.
  3. Installation of air cleaner case sub-assembly (Refer to ON-VEHICLE INSPECTION )
  4. Installation of camshaft timing oil control valve assembly (bank 1 exhaust side)
    1. Install the back-up ring to the camshaft timing oil control valve assembly.
    2. Apply engine oil to new O-ring, and attach it to the camshaft timing oil control valve assembly.
    3. Using 2 bolts, install the camshaft timing oil control valve assembly.

      Standard value: T=6.4N.m {65kgf.cm} {4.7ft.lbf}

    4. Connect the connector for camshaft timing oil control valve assembly.
  5. Installation of camshaft timing oil control valve assembly (bank 1 intake side)
    1. Install the back-up ring to the camshaft timing oil control valve assembly.
    2. Apply engine oil to new O-ring, and attach it to the camshaft timing oil control valve assembly.
    3. Using 2 bolts, install the camshaft timing oil control valve assembly.

      Standard value: T=6.4N.m {65kgf.cm} {4.7ft.lbf}

    4. Connect the connector for camshaft timing oil control valve assembly.
  6. Connection of the battery ground terminal

    Standard value: T=6.0N.m {61kgf.cm} {4.4ft.lbf}