Engine Coolant Temperature Sensor (Fa20): Installation

1. Using a new gasket, install the engine water temperature sensor.

   Standard value: T=18N.m {184kgf.cm} {13.3ft.lbf}

   CAUTION: The torque wrench may be combined with the union nut wrench to extend its length for tightening operation. In this case, if it is tightened to the specified torque indicated on the torque wrench, the actual tightening torque exceeds the specification. (Refer to WORKING PRECAUTIONS AND NOTES )
2. Connect the connector for engine water temperature sensor.

Standard value: T=6.0N.m {61kgf.cm} {4.4ft.lbf}