Engine Oil Temperature Sensor (Fa20): Installation

Engine oil temperature sensor installation
1. Install a new gasket to the engine oil temperature sensor.
2. Install the engine oil temperature sensor.
  Standard value: T=18N.m {184kgf.cm} {13.3ft.lbf}
3. Connect the connector of engine oil temperature sensor.
Installation of air cleaner case sub-assembly (Refer to ON-VEHICLE INSPECTION )
Connection of the battery ground terminal
Standard value: T=6.0N.m {61kgf.cm} {4.4ft.lbf}
Engine oil leakage check (Refer to ENGINE OIL PRESSURE SWITCH ASSEMBLY (FA20) )