LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2016 >> Outback 3.6R Limited >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (H6DO) >> Fuel Pump Control Unit >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Pump Control Unit: Removal

  1. Disconnect the ground terminal from battery sensor. < Ref. to BATTERY , NOTE, Repair Contents. >
  2. Remove the trunk trim panel assembly - side on the RH side. (Sedan model) < Ref. to REMOVAL , Rear Quarter Trim. >
  3. Remove the right side rear quarter trim. (OUTBACK model) < Ref. to REMOVAL , Rear Quarter Trim. >
  4. Remove the fuel pump control unit.
    • Sedan model
      Fig 1: Locating Fuel Pump Control Unit Screw (Sedan Model)
      G10263647Courtesy of SUBARU OF AMERICA, INC.
    • OUTBACK model
      Fig 2: Locating Fuel Pump Control Unit Screw (OUTBACK Model)
      G10263648Courtesy of SUBARU OF AMERICA, INC.
  5. Disconnect the connector from fuel pump control unit.
    Fig 3: Disconnecting Connector From Fuel Pump Control Unit
    G10263649Courtesy of SUBARU OF AMERICA, INC.