Main Switch

CAUTION:

After installing the switch - power window main, always perform the initial setting.
Failure to do so may cause the improper activation of auto-reverse operation for pinching hazard prevention.
Use protective paper to avoid damage to the trim panel.

Install the panel - power window main switch to the trim panel - front door.
Install the trim panel - front door. < Ref. to INSTALLATION , Door Trim. >
Connect the battery ground terminal. < Ref. to BATTERY , NOTE, Note. >
NOTE: For models other than STI model, connect the ground terminal to battery sensor.
Perform initial setting operation (reset operation A). < Ref. to RESET OPERATION A , OPERATION, Power Window System. >