Airbag Control Module: Installation
- Before installation, inspect the following items and replace any faulty part with a new part.
- Control module is deformed.
- Control module connector is damaged.
- Control module mounting bracket is damaged.
- Install the airbag control module.CAUTION: Do not reuse the bolt and nut.
Always replace with the specified new bolts and nuts.Tightening torque:
25 N.m (2.5 kgf-m, 18.4 ft-lb)
- Install the audio assembly or navigation assembly.
- Install the center grille assembly.
- Install the cover - shift lever and the console box assembly.
- Connect the battery ground terminal. < Ref. to
BATTERY
, NOTE, Note. >NOTE: For models other than STI model, connect the ground terminal to battery sensor.