LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2016 >> WRX Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Vehicle Dynamics Control (VDC) System >> VDC Control Module and Hydraulic Control Unit (VDCCM&H/U) >> Maintenance Mode >> VDCCM Parameter Reading
April 5, 2026: LEMON Manuals is launched! Read the announcement.

VDCCM Parameter Reading

  1. Perform reading of parameter.
    1. Connect the Subaru Select Monitor to data link connector.
      NOTE: For detailed operation procedures, refer to "Application help".
    2. Turn the ignition switch to ON.
    3. On «Start» display, select «Diagnosis».
    4. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».
    5. On «Main Menu» display, select «Each System».
    6. On «Select System» display, select «Brake Control System» and select «Enter».
    7. On «Select Function» display, select «Work Support».
    8. On «Work Support» display, select «Reading of parameter: ECM to SSM».
  2. Save and close the file.
scientia non olet · About LEMON Manuals