Exhaust Side

Disconnect the ground terminal from battery sensor. < Ref. to BATTERY , NOTE, Note. >
Remove the under cover. < Ref. to REMOVAL , Front Under Cover. >
Disconnect the connector (A) from the camshaft position sensor, and remove the camshaft position sensor from the chain cover.
- RH side
  
  Fig 1: Identifying Camshaft Position Sensor Connector With Bolt - Exhaust RH Side
  Courtesy of SUBARU OF AMERICA, INC.
- LH side
  
  Fig 2: Identifying Camshaft Position Sensor Connector With Bolt - Exhaust RH Side
  Courtesy of SUBARU OF AMERICA, INC.