Crankshaft Position Sensor: Removal
- Remove the collector cover. < Ref. to
REMOVAL
, Collector Covers
- Disconnect the ground terminal from battery sensor. < Ref. to
BATTERY
, NOTE, Notes
- Remove the intercooler. < Ref. to
REMOVAL
, Intercoolers
- Remove the throttle body. < Ref. to
REMOVAL , Throttle Body. >
- Remove the bolts securing the engine harness.
Courtesy of SUBARU OF AMERICA, INC.
- Disconnect the connector (A) from the crankshaft position sensor, and remove the crankshaft position sensor from the cylinder block.
Courtesy of SUBARU OF AMERICA, INC.