Entry Start System Start System (Keyless Start)
- Entry & start system (start function)
- Parts location
- Circuit figure
- Description of functions
- How To Proceed With Troubleshooting
- Function inspection
- Customize Parameters
- ECM terminal arrangement
- Diagnosis System
- DTC Check/Clear
- Data monitor/active test
- Diagnostic Trouble Code Chart
- DTC B2271 IGN fuse blown or IGN circuit fault
- DTC B2274 ACC circuit abnormal
- DTC B2275 STSW circuit abnormal
- DTC B2276 ACCR signal abnormal
- DTC B2277 Submerging circuit abnormal
- DTC B2282 Vehicle speed signal abnormal; DTC B2283 Vehicle speed sensor fault detection
- DTC B2284 Brake Signal (Cable-Information does not match to BEAN-Information)
- DTC B2285 Steering lock position signal abnormal
- DTC B2286 Run able Signal (Cable-Information does not match to BEAN-Information)
- DTC U0073 Control Module Communication Bus "A" off; DTC U0100 Lost Communication With ECM/PCM "A"; DTC U0101 Lost Communication With TCM; DTC U0122 Lost Communication With Vehicle Dynamics Control Module; DTC U0140 Lost Communication With Body Control Module; DTC U0155 Lost Communication With Instrument Panel Cluster (IPC) Control Module; DTC U0401 Invalid Data Received From ECM/PCM "A"; DTC U0422 Invalid Data Received From Body Control Module
- The engine does not start
- The power does not turn on (does not change to both ACC ON or IG ON)
- The power does not turn ON (power status changes to ACC ON but not to IG ON)
- The power does not turn ON (power status changes to IG ON but not to ACC ON)