Filler pipe (FA20): Installation

1. Open the fuel filler lid.
2. Insert the filler pipe from inside of the rear fender.
3. Align the cutout of the filler pipe protector with the protrusion of the neck holder. Insert the filler pipe protector all the way down and turn in the direction of the arrow to lock.
   Fig 1: Turning Fuel Filler Pipe Protector

   Courtesy of SUBARU OF AMERICA, INC.
4. Install the filler pipe to the vehicle.

   Standard value: T=7.5 N.m {77 kgf.cm} {5.5 ft.lb}

   Fig 2: Locating Filler Pipe Bolts And Nuts

   Courtesy of SUBARU OF AMERICA, INC.
5. Connect the fuel tank to filler pipe hose (A) and vent hose (B) to the filler pipe, and connect the quick connector of drain tube (C).

   Standard value: T=2.0 N.m {20 kgf.cm} {1.5 ft.lb}

Fig 3: Connecting Fuel Tank To Filler Pipe Hose And Vent Hose To Filler Pipe

Courtesy of SUBARU OF AMERICA, INC.

1. Install the rear mud guard RH with clips.

Standard value: T=6.0 N.m {61 kgf.cm} {4.4 ft.lb}