With Entry Start
ENGINE IMMOBILIZER SYSTEM DIAGNOSTIC TROUBLE CODE IDENTIFICATION
| Diagnostic codes | Diagnostic items | Diagnostic code output check operation | Reference |
|---|---|---|---|
| B1571 | [Reference Code Incompatibility] | Engine switch on (IG) | DIAGNOSTIC TROUBLE CODE CHART |
| B1572 | [IMM Circuit Failure (Except Antenna Circuit)] | Engine switch on (IG) | Inspection steps |
| B1576 | [EGI Control Module EEPROM] |
|
DTC B1576 EGI unit EEPROM |
| B1577 | [IMM Control Module EEPROM] | Engine switch on (IG) | DTC B1577 Immobilizer unit EEPROM |
CERTIFICATION ECU DIAGNOSTIC TROUBLE CODE IDENTIFICATION
| Diagnostic codes | Diagnostic items | Diagnostic code output check operation | Reference |
|---|---|---|---|
| B2784 | [Abnormal antenna coil] | With the shift lever in P* the electrical key transmitter sub-assembly is held against the engine switch and an engine start operation is performed by pressing and holding the engine switch when the transmitter battery is depleted. | Inspection steps |
| B278A | [Abnormal immobilizer power supply] | With the shift lever in P* the electrical key transmitter is held against the engine switch and an engine start operation is performed by pressing and holding the engine switch when the transmitter battery is depleted. | DTC B278A Faulty immobilizer power |
| B278D | [ID code box recognition evaluation abnormal] | Always | DTC B278D ID code box recognition error |