Crankshaft position sensor (FA20): Removal

Disconnection of the battery ground terminal (Refer to Working precautions and notes )
Vacuum tube connector hose disconnection (transmission M/T)
1. Move the hose clamp and disconnect the vacuum tube connector hose from the intake manifold ASSY.
2. Remove the bolt and disconnect the vacuum tube connector hose.
Fig 1: Locating Vacuum Tube Connector Hose Clamp And Bolt
Courtesy of SUBARU OF AMERICA, INC.
Removal of crankshaft position sensor
1. Disconnect the crankshaft position sensor connector.
2. Remove the bolt, and remove the crankshaft position sensor.
Fig 2: Locating Crankshaft Position Sensor Connector And Bolt
Courtesy of SUBARU OF AMERICA, INC.