Eyesight System (Driver Assist) DTCS
EYESIGHT SYSTEM (DRIVER ASSIST) DIAGNOSTIC TROUBLE CODE IDENTIFICATION
| DTC | Item | Contents of diagnosis | Reference |
|---|---|---|---|
| U0073 | CONTROL MODULE COMMUNICATION BUS OFF | Detected when bus off status (the stereo camera detects the failure and is disconnected from CAN line) occurs. | Ref. to DTC U0073 CONTROL MODULE COMMUNICATION BUS OFF , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| U0100 | LOST COMMUNICATION WITH ECM/PCM "A" | Detected when CAN data from ECM is not transmitted to stereo camera. | Ref. to DTC U0100 LOST COMMUNICATION WITH ECM/PCM "A" , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| U0101 | LOST COMMUNICATION WITH TCM | Detected when CAN data from TCM is not transmitted to stereo camera. | Ref. to DTC U0101 LOST COMMUNICATION WITH TCM , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| U0122 | LOST COMMUNICATION WITH VEHICLE DYNAMICS CONTROL MODULE | Detected when CAN data from VDC is not transmitted to stereo camera. | Ref. to DTC U0122 LOST COMMUNICATION WITH VEHICLE DYNAMICS CONTROL MODULE , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| U0140 | LOST COMMUNICATION WITH BODY CONTROL MODULE | Detected when CAN data from body integrated unit is not transmitted to stereo camera. | Ref. to DTC U0140 LOST COMMUNICATION WITH BODY CONTROL MODULE , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| U0155 | LOST COMMUNICATION WITH INSTRUMENT PANEL CLUSTER (IPC) CONTROL MODULE | Detected when CAN data from combination meter is not transmitted to stereo camera. | Ref. to DTC U0155 LOST COMMUNICATION WITH INSTRUMENT PANEL CLUSTER (IPC) CONTROL MODULE , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| U0401 | INVALID DATA RECEIVED FROM ECM/PCM "A" | Failure counter diagnosis of engine control module (ECM) | Ref. to DTC U0401 INVALID DATA RECEIVED FROM ECM/PCM "A" , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| U0402 | INVALID DATA RECEIVED FROM TCM | Failure counter diagnosis of automatic transmission control module (TCM) | Ref. to DTC U0402 INVALID DATA RECEIVED FROM TCM , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| U0416 | INVALID DATA RECEIVED FROM VEHICLE DYNAMICS CONTROL MODULE | Failure counter diagnosis of VDC control module (VDC Control Module) | Ref. to DTC U0416 INVALID DATA RECEIVED FROM VEHICLE DYNAMICS CONTROL MODULE , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| U0422 | INVALID DATA RECEIVED FROM BODY CONTROL MODULE | Failure counter diagnosis of body integrated unit | Ref. to DTC U0422 INVALID DATA RECEIVED FROM BODY CONTROL MODULE , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| U0423 | INVALID DATA RECEIVED FROM INSTRUMENT PANEL CLUSTER CONTROL MODULE | Failure counter diagnosis of combination meter | Ref. to DTC U0423 INVALID DATA RECEIVED FROM INSTRUMENT PANEL CLUSTER CONTROL MODULE , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| B2801 | TCM ABNORMAL | Detected when error occurs in the automatic transmission. | Ref. to DTC B2801 TCM ABNORMAL , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| B2802 | ETC ABNORMAL | Detected when error occurs in the electronic throttle control. | Ref. to DTC B2802 ETC ABNORMAL , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| B2806 | ECM ABNORMAL | Detected when error occurs in the engine control module (ECM). | Ref. to DTC B2806 ECM ABNORMAL , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| B2807 | Detected when cruise indicator illumination request from ECM and ON/OFF information of cruise function do not match. | Ref. to DTC B2807 ECM ABNORMAL , Diagnostic Procedure with Diagnostic Trouble Code (DTC). | |
| B2809 | VDC MALFUNCTION | Detected when error occurs in the VDC. (VDC failure) | Ref. to DTC B2809 VDC MALFUNCTION , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| B280A | VDC ECHO BACK DISAGREEMENT | Detected when error occurs in the VDC. (VDC brake control malfunction 1) | Ref. to DTC B280A VDC ECHO BACK DISAGREEMENT , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| B280B | VDC BRAKE FLUID PRESSURE | Detected when error occurs in the VDC. (VDC brake control malfunction 2) | Ref. to DTC B280B VDC BRAKE FLUID PRESSURE , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| B280F | COMBINATION METER MALFUNCTION | Detected when error occurs in the CAN communication with combination meter. | Ref. to DTC B280F COMBINATION METER MALFUNCTION , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| B2810 | INCOMPATIBLE WITH EyeSight (COMBINATION METER) | Detected when different (undesignated) type of combination meter is installed. | Ref. to DTC B2810 INCOMPATIBLE WITH EyeSight (COMBINATION METER) , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| B2814 | POWER SUPPLY LOW VOLTAGE | Detected when battery voltage is below specified value or when the +B harness of the stereo camera is broken. | Ref. to DTC B2814 POWER SUPPLY LOW VOLTAGE , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| B2815 | POWER SUPPLY HIGH VOLTAGE | Detected when battery voltage exceeds the specified value. | Ref. to DTC B2815 POWER SUPPLY HIGH VOLTAGE , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| B2817 | BRAKE LAMP | Detected when error occurs in the brake light illumination circuit. | Ref. to DTC B2817 BRAKE LAMP , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| B28A0 | VEHICLE MODEL JUDGMENT | Detected when the model code stored in EEPROM and the model code used for CAN data are different, or when +B harness of the stereo camera is broken at aiming completion. | Ref. to DTC B28A0 VEHICLE MODEL JUDGMENT , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| B28A1 | EyeSight COMMUNICATION (ECM) | Abnormal judgment for stereo camera by ECM Or detected when the stereo camera or ECM is assembled incorrectly. |
Ref. to DTC B28A1 EyeSight COMMUNICATION (ECM) , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| B28A2 | EyeSight COMMUNICATION (VDC) | Abnormal judgment for stereo camera data by VDC | Ref. to DTC B28A2 EyeSight COMMUNICATION (VDC) , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| B28A3 | EyeSight COMMUNICATION (METER) | Abnormal judgment for stereo camera data by combination meter | Ref. to DTC B28A3 EyeSight COMMUNICATION (METER) , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| B28A5 | ENGINE TORQUE LIMITER CONTROL PROHIBIT | Detected when error occurs in the transmission data from stereo camera to ECM. | Ref. to DTC B28A5 ENGINE TORQUE LIMITER CONTROL PROHIBIT , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| B28A6 | INTERNAL STEREO CAMERA COMMUNICATION 1 | Detected when communication error occurs inside the stereo camera. | Ref. to DTC B28A6 INTERNAL STEREO CAMERA COMMUNICATION 1 , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| B28A7 | STEREO CAMERA RECOGNITION (TARGET) | Detected when error occurs in the communication data inside the control module due to external factors such as noises. | Ref. to DTC B28A7 STEREO CAMERA RECOGNITION (TARGET) , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| B28A8 | INTERNAL STEREO CAMERA COMMUNICATION 2 | Ref. to DTC B28A8 INTERNAL STEREO CAMERA COMMUNICATION 2 , Diagnostic Procedure with Diagnostic Trouble Code (DTC). | |
| B28A9 | STEREO CAMERA SYNCHRONIZED RECOGNITION DATA | Ref. to DTC B28A9 STEREO CAMERA SYNCHRONIZED RECOGNITION DATA , Diagnostic Procedure with Diagnostic Trouble Code (DTC). | |
| B28AA | STEREO CAMERA MICROCOMPUTER 1 | Detected when error occurs in the communication with microcomputer 1 system inside the stereo camera. | Ref. to DTC B28AA STEREO CAMERA MICROCOMPUTER 1 , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| B28AB | STEREO CAMERA MICROCOMPUTER 2 | Detected when error occurs in the communication with microcomputer 2 system inside the stereo camera. | Ref. to DTC B28AB STEREO CAMERA MICROCOMPUTER 2 , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| B28AC | STEREO CAMERA ASIC | Detected when error occurs in the ASIC system inside the stereo camera. | Ref. to DTC B28AC STEREO CAMERA ASIC , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| B28AD | STEREO CAMERA IMAGE RECOGNITION | Detected when error occurs in the stereo camera image system. | Ref. to DTC B28AD STEREO CAMERA IMAGE RECOGNITION , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| B28AE | INTERNAL STEREO CAMERA POWER SUPPLY | Detected when error occurs in the internal power supply system of stereo camera. | Ref. to DTC B28AE INTERNAL STEREO CAMERA POWER SUPPLY , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| B28AF | STEREO CAMERA ADJUSTMENT INCOMPLETE | Detected when adjustment/inspection of camera has not been completed normally. | Ref. to DTC B28AF STEREO CAMERA ADJUSTMENT INCOMPLETE , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| B28B1 | STEREO CAMERA AUTOMATIC ADJUSTMENT | Detected when the optical axis of stereo camera is deviated in lateral direction or when the fluctuation range of automatic adjustment value has been enlarged. | Ref. to DTC B28B1 STEREO CAMERA AUTOMATIC ADJUSTMENT , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| B28B2 | STEREO CAMERA HIGH TEMPERATURE | Detected when the temperature of the stereo camera excessively increases. (When this DTC is detected, the camera will not return to the normal state after performing adjustment or inspection. In this case, always replace the stereo camera.) | Ref. to DTC B28B2 STEREO CAMERA HIGH TEMPERATURE , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| B28B3 | STEREO CAMERA LOW TEMPERATURE | Detected when the temperature of the stereo camera excessively decreases. (When this DTC is detected, the camera will not return to the normal state after performing adjustment or inspection. In this case, always replace the stereo camera.) | Ref. to DTC B28B3 STEREO CAMERA LOW TEMPERATURE , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| B28B5 | +B CIRCUIT ABNORMAL | Detected when there is an open circuit in power supply line of the stereo camera. | Ref. to DTC B28B5 +B CIRCUIT OPEN , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| B28B6 | PRE-COLLISION OFF SWITCH | Pre-collision brake switch or harness is faulty. Detected also when the switch is held down for over 45 seconds. | Ref. to DTC B28B6 PRE-COLLISION OFF SWITCH , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| B28B7 | LDP OFF SWITCH | Lane departure warning OFF switch or harness is faulty. Detected also when the switch is held down for over 45 seconds. | Ref. to DTC B28B7 LDP OFF SWITCH , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| B28B8 | EyeSight STEERING SWITCH 1 | Detected when the EyeSight steering switch is not installed, when the switch is faulty, or when the harness is abnormal, open or stuck to ON. | Ref. to DTC B28B8 EyeSight STEERING SWITCH 1 , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| B28B9 | EyeSight STEERING SWITCH 2 | Ref. to DTC B28B9 EyeSight STEERING SWITCH 2 , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |