LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2017 >> Outback 2.5i >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (H4DO) >> Throttle Body >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Throttle Body: Installation

  1. Install the throttle body to the intake manifold assembly.
    NOTE: Use a new gasket.

    Tightening torque: 

    8 N.m (0.8 kgf-m, 5.9 ft-lb) 

  2. Connect the connector to the throttle position sensor.
  3. Connect the preheater hoses to the throttle body.
  4. Install the air intake boot. Ref. to INSTALLATION , Air Intake Boot.
  5. Connect the ground terminal to battery sensor. Ref. to BATTERY
  6. Fill engine coolant. Ref. to FILLING OF ENGINE COOLANT , REPLACEMENT, Engine Coolant.
scientia non olet · About LEMON Manuals