Without DTC

Detecting condition:

Trouble symptom:

NOTE: Read all DTCs with the STEERING warning light OFF. When «No DTC» is displayed on Subaru Select Monitor, the system is operating properly.

Step	Check	Yes	No
1 CHECK LAN SYSTEM. Perform the diagnosis for LAN system using the Subaru Select Monitor. Ref. to BASIC DIAGNOSTIC PROCEDURE .	Is DTC U0131 detected?	Perform the diagnosis according to DTC for LAN system. Ref. to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) .	Go to step 2 .
2 CHECK COMBINATION METER. Check the STEERING warning light when the ignition is turned from OFF to ON.	Does the STEERING warning light illuminate at ignition switch ON, and turn off two seconds after the engine is started?	Finish the diagnosis.	Replace the combination meter. Ref. to COMBINATION METER .