LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2017 >> Outback 3.6R Limited >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (H6DO) >> Crankshaft Position Sensor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Crankshaft Position Sensor: Installation

  1. Install the crankshaft position sensor to the cylinder block, and connect the connector to the crankshaft position sensor.

    Tightening torque: 

    6.4 N.m (0.7 kgf-m, 4.7 ft-lb) 

  2. Install the service hole plug.
  3. Install the throttle body. <Ref. to INSTALLATION , Throttle Body.>
  4. Install the air intake boot. <Ref. to INSTALLATION , Air Intake Boot.>
  5. Connect the ground terminal to battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>
  6. Install the collector cover.
scientia non olet · About LEMON Manuals