Throttle Body: Installation

Install the throttle body to the intake manifold.
NOTE: Use a new gasket.

Tightening torque:

8 N.m (0.8 kgf-m, 5.9 ft-lb)
Connect the connector (A) to the throttle position sensor, and connect the preheater hose (B) to the throttle body.

Fig 1: Locating Throttle Body Bolts With Preheater Hose And Connector
Courtesy of SUBARU OF AMERICA, INC.
Install the air intake boot. <Ref. to INSTALLATION , Air Intake Boot.>
Connect the ground terminal to battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>
Fill engine coolant. <Ref. to FILLING OF ENGINE COOLANT , REPLACEMENT, Engine Coolant.>
Install the collector cover.