Keyless Access Control Module: Installation

CAUTION:

When the control module related to immobilizer has been replaced, be sure to perform the registration of immobilizer system. For detailed operation procedure, refer to "Type D" described in "REGISTRATION MANUAL FOR IMMOBILIZER" .
Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". <Ref. to CAUTION , General Description.>

Install the keyless access Control Module.
Install the relay & fuse box and fuse holder.
Tightening torque:

Relay & fuse box: 7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
Install the cover assembly - instrument panel LWR driver and the knee airbag module.
Connect the battery ground terminal. <Ref. to BATTERY , NOTE, Note.>