LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2017 >> WRX Base >> Repair and Diagnosis (Single Page) >> Steering >> Power Steering >> Power Steering System (Service Information) >> Power Steering Control Module >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Steering Control Module: Installation

  1. Attach the bracket - control module.

    Tightening torque: 

    7.5 N.m (0.8 kgf-m, 5.5 ft-lb) 

  2. Install the power steering control module.

    Tightening torque: 

    7.5 N.m (0.8 kgf-m, 5.5 ft-lb) 

  3. Connect the harness connector.
    CAUTION: Make sure that the connector is securely locked.
  4. Connect the ground terminal to the battery sensor. <Ref. to BATTERY , NOTE, Note.>
scientia non olet · About LEMON Manuals