LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2017 >> WRX Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (2.0L) >> High Pressure Fuel Delivery Pipe >> Removal >> High-Pressure Fuel Delivery Pipe Assembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

High-Pressure Fuel Delivery Pipe Assembly

CAUTION:
  • Be careful not to spill fuel.
  • Catch the fuel from the pipes using a container or cloth.
  1. Disconnect the ground terminal from battery sensor. <Ref. to BATTERY , NOTE, Note.>
  2. Remove the intake manifold. <Ref. to REMOVAL , Intake Manifold.>
  3. Remove the fuel pipe insulator No. 1. <Ref. to FUEL PIPE INSULATOR NO. 1 , REMOVAL, Fuel Insulator.>
  4. Remove the fuel pipe insulator No. 2. <Ref. to FUEL PIPE INSULATOR NO. 2 , REMOVAL, Fuel Insulator.>
  5. Remove the fuel pipe insulator No. 3. <Ref. to FUEL PIPE INSULATOR NO. 3 , REMOVAL, Fuel Insulator.>
  6. Remove the flare nut (A) and bolt (B), and then remove the high-pressure fuel delivery pipe assembly.
Fig 1: High-Pressure Fuel Delivery Pipe Assembly Flare Nuts And Bolts
G10266132Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals