Throttle Sensor (Method With SUBARU Select Monitor)
- After warming-up the engine, turn the ignition switch to OFF.
- Turn the ignition switch to ON. (engine OFF)
- Read the throttle opening angle signal and voltage of throttle sensor using Subaru Select Monitor. <Ref. to DISPLAY CURRENT ENGINE DATA , OPERATION, Subaru Select Monitor.>
NOTE:
Due to the specification of the Subaru Select Monitor, value read from the throttle opening angle signal is highlighted and displayed as the voltage readings of sub throttle sensor.
| Throttle sensor | Throttle opening angle signal | Standard |
|---|---|---|
| Main | 0.0% | Approx. 0.7 V |
| 100.0% | Approx. 3.9 V | |
| Sub | 0.0% | Approx. 1.1 V |
| 100.0% | Approx. 4.4 V |