Drive Cycle E
| DTC | Item | Condition |
|---|---|---|
| P0461 | Fuel Level Sensor "A" Circuit Range/Performance | - |
Diagnostic procedure:
- Make sure that the battery voltage is 10.9 V or more.
- Perform the Clear Memory Mode. <Ref. to CLEAR MEMORY MODE .>
- Drive for approximately 30 L (7.9 US gal, 6.6 Imp gal) of fuel.NOTE:
- It is acceptable to drive the vehicle intermittently.
- Do not disconnect the battery terminals while diagnosing. (Data will be cleared by disconnecting the battery terminals.)
- Read the temporary code using the Subaru Select Monitor or general scan tool. <Ref. to OPERATION , Read Diagnostic Trouble Code (DTC).>