Without DTC
DETECTING CONDITION:
- Defective combination meter
- Open circuit of harness
TROUBLE SYMPTOM:
- The STEERING warning light will not turn off.
- «No Diagnostic Code Present» will be displayed on Subaru Select Monitor.
NOTE:
When the STEERING warning light is OFF and «No Diagnostic Code Present» is displayed on Subaru Select Monitor when all DTCs are read, the system is operating properly.
| Step | Check | Yes | No |
|---|---|---|---|
| 1 CHECK LAN SYSTEM. Perform the diagnosis for LAN system using the Subaru Select Monitor. <Ref. to Basic Diagnostic Procedure .> |
Is DTC U0131 detected? | Perform the diagnosis according to DTC for LAN system. <Ref. to List of Diagnostic Trouble Code (DTC) .> | Go to step 2 . |
| 2 CHECK COMBINATION METER. Check the STEERING warning light when the ignition is turned from OFF to ON. |
Does the STEERING warning light illuminate at ignition switch ON, and turn off two seconds after the engine is started? | Finish the diagnosis. | Replace the combination meter. <Ref. to Combination Meter .> |