Fuel Pump: Removal

WARNING: Place "NO OPEN FLAMES" signs near the working area.

CAUTION:

Be careful not to spill fuel.
Catch the fuel from the tubes using a container or cloth.
If the fuel gauge indicates that two thirds or more of the fuel is remaining, be sure to drain fuel before starting work to avoid the fuel to spill.

NOTE: Fuel pump assembly consists of fuel pump, fuel filter and fuel level sensor.

Release the fuel pressure. <Ref. to RELEASING OF FUEL PRESSURE , PROCEDURE, Fuel.>
Drain fuel. <Ref. to DRAINING FUEL (WITH SUBARU SELECT MONITOR) , PROCEDURE, Fuel.>
Disconnect the ground cable from battery.
Remove the rear seat cushion. <Ref. to REMOVAL , Rear Seat.>
Remove the service hole cover.

Fig 1: Locating Service Hole Cover (Fuel Pump) Screws
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the connector from fuel pump.

Fig 2: Disconnecting Connector From Fuel Pump
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the quick connectors of fuel delivery tube (A), fuel return tube (B), and jet pump tube (C). <Ref. to REMOVAL , Fuel Delivery, Return and Evaporation Lines.>

Fig 3: Locating Fuel Delivery/Return Tube And Jet Pump Tube Connector
Courtesy of SUBARU OF AMERICA, INC.
Remove the nuts which hold the fuel pump upper plate to the fuel tank.

Fig 4: Locating Nuts Of Fuel Pump Upper Plate
Courtesy of SUBARU OF AMERICA, INC.
Remove the fuel pump assembly from the fuel tank.