LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2018 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (Service Information) >> Accelerator Pedal Rod ASSY (FA20) >> On-vehicle Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

On-vehicle Inspection

  1. Function inspection of accelerator pedal sensor ASSY
    1. Connect the SSM4 to the DLC.
    2. Turn the ignition switch to ON.
      G12586402Courtesy of SUBARU OF AMERICA, INC.
    3. According to the display, select [ECU Data Monitor] →[Accelerator Sensor No1 Voltage and Accelerator Sensor No2 Voltage], and check the value when the accelerator pedal is operated.
Pedal condition Accelerator No. 1 sensor voltage Accelerator No. 2 sensor voltage
Full closed 0.5 to 0.8 V 0.5 to 0.8 V
Full open 2.4 to 3.5 V 2.4 to 3.5 V
Full closed →Full open →Full closed Voltage shall change continuously. Voltage shall change continuously.
scientia non olet · About LEMON Manuals