Throttle Body ASSY (FA20): Removal
- Disconnection of the battery ground terminal (Refer to WORKING PRECAUTIONS AND NOTES )
- Draining of coolant (SUBARU Super Coolant) (Refer to COOLANT (FA20) )
- Removal of air cleaner case SUB-ASSY (Refer to
V-BELT (FA20)
, Step 1)
- Removal of throttle body ASSY (with motor)
- Disconnect the connector for the throttle body ASSY (with motor).
- Slide 2 clamps, and disconnect the water bypass hose No. 2 and water bypass hose No. 3 from the throttle body ASSY (with motor).
- Remove 4 bolts, and remove the throttle body ASSY (with motor) from the intake manifold.
- Remove the throttle body gasket from the intake manifold.
- Disconnect the connector for the throttle body ASSY (with motor).