LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2018 >> BRZ tS >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (Service Information) >> Camshaft Position Sensor (FA20) >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Camshaft Position Sensor (FA20): Removal

  1. Disconnection of the battery ground terminal (Refer to WORKING PRECAUTIONS AND NOTES )
    G12586409Courtesy of SUBARU OF AMERICA, INC.
  2. Removal of camshaft position sensor (bank 1 intake side)
    1. Disconnect the connector for camshaft position sensor.
    2. Remove the bolt, and remove the camshaft position sensor.
    3. Remove the O-ring from the camshaft position sensor.
    G12586410Courtesy of SUBARU OF AMERICA, INC.
  3. Removal of camshaft position sensor (bank 1 exhaust side)
    1. Disconnect the connector for camshaft position sensor.
    2. Remove the bolt, and remove the camshaft position sensor.
    3. Remove the O-ring from the camshaft position sensor.
    G12586411Courtesy of SUBARU OF AMERICA, INC.
  4. Removal of camshaft position sensor (bank 2 intake side)
    1. Disconnect the connector for camshaft position sensor.
    2. Remove the bolt, and remove the camshaft position sensor.
    3. Remove the O-ring from the camshaft position sensor.
  5. Removal of under cover front AL (Refer to REMOVAL )
    G12586412Courtesy of SUBARU OF AMERICA, INC.
  6. Removal of camshaft position sensor (bank 2 exhaust side)
    1. Disconnect the connector for camshaft position sensor.
    2. Remove the bolt, and remove the camshaft position sensor.
    3. Remove the O-ring from the camshaft position sensor.
scientia non olet · About LEMON Manuals