Engine Oil Temperature Sensor (FA20): Installation
- Engine oil temperature sensor installation
- Install a new gasket to the engine oil temperature sensor.
- Install the engine oil temperature sensor.
Standard value: T=18N.m {184kgf.cm} {13.3ft.lbf}
- Connect the connector of engine oil temperature sensor.
- Installation of air cleaner case SUB-ASSY (Refer to INSTALLATION , Step 4)
- Connection of the battery ground terminal
Standard value: T=6.0N.m {61kgf.cm} {4.4ft.lbf}
- Engine oil leakage check (Refer to REPLACEMENT , Step 7)