LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2018 >> BRZ tS >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (Service Information) >> Relay >> Unit Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Unit Inspection

G12586469Courtesy of SUBARU OF AMERICA, INC.
  1. Inspection of IG2 relay (IG2)
    1. Measure the resistance between the terminals.
    STANDARD VALUE RESISTANCE SPECIFICATION

    Inspection terminals Inspection conditions Standard value
    3 - 5 When the battery voltage is not applied to the terminal 1 and terminal 2: 10 k Ω or more
    3 - 5 When the battery voltage is applied to the terminal 1 and terminal 2: Less than 1 Ω
    G12586469Courtesy of SUBARU OF AMERICA, INC.
  2. Inspection of EFI relay (EFI MAIN1)
    1. Measure the resistance between the terminals.
    STANDARD VALUE RESISTANCE SPECIFICATION

    Inspection terminals Inspection conditions Standard value
    3 - 5 When the battery voltage is not applied to the terminal 1 and terminal 2: 10 k Ω or more
    3 - 5 When the battery voltage is applied to the terminal 1 and terminal 2: Less than 1 Ω
    G12586469Courtesy of SUBARU OF AMERICA, INC.
  3. Inspection of EFI relay (EFI MAIN2)
    1. Measure the resistance between the terminals.
    STANDARD VALUE RESISTANCE SPECIFICATION

    Inspection terminals Inspection conditions Standard value
    3 - 5 When the battery voltage is not applied to the terminal 1 and terminal 2: 10 k Ω or more
    3 - 5 When the battery voltage is applied to the terminal 1 and terminal 2: Less than 1 Ω
    G12586469Courtesy of SUBARU OF AMERICA, INC.
  4. Inspection of EFI relay (EFI MAIN3)
    1. Measure the resistance between the terminals.
    STANDARD VALUE RESISTANCE SPECIFICATION

    Inspection terminals Inspection conditions Standard value
    3 - 5 When the battery voltage is not applied to the terminal 1 and terminal 2: 10 k Ω or more
    3 - 5 When the battery voltage is applied to the terminal 1 and terminal 2: Less than 1 Ω
    G12586473Courtesy of SUBARU OF AMERICA, INC.
  5. Inspection of INJ relay (INJ)
    1. Measure the resistance between the terminals.
    STANDARD VALUE RESISTANCE SPECIFICATION

    Inspection terminals Inspection conditions Standard value
    3 - 5 When the battery voltage is not applied to the terminal 1 and terminal 2: 10 k Ω or more
    3 - 5 When the battery voltage is applied to the terminal 1 and terminal 2: Less than 1 Ω
    G12586474Courtesy of SUBARU OF AMERICA, INC.
  6. Inspection of ETCS relay (ETCS)
    1. Measure the resistance between the terminals.
    STANDARD VALUE RESISTANCE SPECIFICATION

    Inspection terminals Inspection conditions Standard value
    3 - 5 When the battery voltage is not applied to the terminal 1 and terminal 2: 10 k Ω or more
    3 - 5 When the battery voltage is applied to the terminal 1 and terminal 2: Less than 1 Ω
    G12586475Courtesy of SUBARU OF AMERICA, INC.
  7. Inspection of F/PMP relay (C/OPEN)
    1. Measure the resistance between the terminals.
STANDARD VALUE RESISTANCE SPECIFICATION

Inspection terminals Inspection conditions Standard value
3 - 5 When the battery voltage is not applied to the terminal 1 and terminal 2: 10 k Ω or more
3 - 5 When the battery voltage is applied to the terminal 1 and terminal 2: Less than 1 Ω
scientia non olet · About LEMON Manuals