LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2018 >> Crosstrek Base, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control/Fuel System >> Camshaft Position Sensor >> Installation >> Exhaust Side
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Exhaust Side

  1. Install the camshaft position sensor to the chain cover with new O-ring.
    NOTE: Apply engine oil to O-ring.

    Tightening torque: 

    6.4N.m (0.7kgf-m, 4.7ft-lb) 

  2. Connect the connectors to camshaft position sensor.
  3. Install the under cover. Ref. to EXTERIOR/INTERIOR TRIM>Front Under Cover>INSTALLATION .
  4. Lower the vehicle.
  5. Connect the battery ground terminal. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals