LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2018 >> Crosstrek Base, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Engine Control/Fuel System >> Throttle Body >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Throttle Body: Installation

  1. Set a new gasket and install the throttle body to the intake manifold assembly.

    Tightening torque: 

    8 N.m (0.8kgf-m, 5.9ft-lb) 

  2. Connect the connector to the throttle position sensor.
  3. Connect the preheater hoses to the throttle body.
  4. Install the air intake boot. Ref. to INTAKE (INDUCTION) (H4DO)>Air Intake Boot>INSTALLATION .
  5. Connect the battery ground terminal. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  6. Fill engine coolant. Ref. to COOLING (H4DO)>Engine Coolant>REPLACEMENT>FILLING OF ENGINE COOLANT .
scientia non olet · About LEMON Manuals