LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2018 >> Crosstrek Base, Standard Trans >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (Diagnostics - Introduction) >> Inspection Mode >> Procedure >> Preparation For The Inspection Mode
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Preparation For The Inspection Mode

  1. Check that the battery voltage is 12 V or more and fuel remains approx. half [20 - 40 L (5.3 - 10.6 US gal, 4.4 - 8.8 Imp gal)].
  2. After performing the diagnostics and clearing memory, check that no DTC remains. Ref. to COMMON (diag)>CLEAR MEMORY .
NOTE: Perform the inspection mode after warming up the engine except when the engine coolant temperature at engine start is specified.
scientia non olet · About LEMON Manuals