Model with push button ignition switch

1. Turn the ignition switch to ON.
2. Using the Subaru Select Monitor, check whether communication to all systems can be executed normally.

Is the system name displayed?

Yes:  Go to  2.

No:  For diagnostic procedures, refer to the LAN article. Ref. to LAN SYSTEM (DIAGNOSTICS)>BASIC DIAGNOSTIC PROCEDURE .

1. Turn the ignition switch to ON.
2. Shift the select lever to "P" range.

While brake pedal is not depressed, is it possible to move the select lever from the "P" range to other ranges?

Yes:  Perform the inspection of "SELECT LEVER CANNOT BE LOCKED OR RELEASED". Ref. to CONTROL SYSTEMS>AT Shift Lock Control System>INSPECTION>SELECT LEVER CANNOT BE LOCKED OR RELEASED .

No:  Go to  3.

While brake pedal is depressed, is it possible to move the select lever from the "P" range to other ranges?

Yes:  Go to  4.

No:  Perform the inspection of "SELECT LEVER CANNOT BE LOCKED OR RELEASED". Ref. to CONTROL SYSTEMS>AT Shift Lock Control System>INSPECTION>SELECT LEVER CANNOT BE LOCKED OR RELEASED .

Shift the select lever to "N" range.

Is it possible to move the select lever from the "N" range to the "P" range?

Yes:  Go to  5.

No:  Perform the inspection of "SELECT LEVER CANNOT BE LOCKED OR RELEASED". Ref. to CONTROL SYSTEMS>AT Shift Lock Control System>INSPECTION>SELECT LEVER CANNOT BE LOCKED OR RELEASED .

1. Shift the select lever to "N" range.
2. Turn the ignition switch to ACC.

While brake pedal is depressed, is it possible to move the select lever from the "N" range to the "P" range?

AT shift lock system is normal.

No:  Perform the inspection of "SELECT LEVER CANNOT BE LOCKED OR RELEASED". Ref. to CONTROL SYSTEMS>AT Shift Lock Control System>INSPECTION>SELECT LEVER CANNOT BE LOCKED OR RELEASED .