LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2018 >> Outback 3.6R Limited >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control/Fuel System (H6DO) >> Front Oxygen (A/F) Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Oxygen (A/F) Sensor: Removal

  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Lift up the vehicle.
  3. Disconnect the connector (A) of the front oxygen (A/F) sensor.
  4. Remove the clip (B) securing the front oxygen (A/F) sensor harness. (LH side only)
  5. Apply spray-type lubricant (004301003) or equivalent to the threaded portion of front oxygen (A/F) sensor, and leave it for one minute or more.
  6. Remove the front oxygen (A/F) sensor.
    CAUTION: When removing the front oxygen (A/F) sensor, wait until exhaust pipe cools, otherwise it will damage the exhaust pipe.
    • RH side
      G10263626Courtesy of SUBARU OF AMERICA, INC.
    • LH side
      G10263627Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals