LH Side
- Remove the collector cover.
- Release the fuel pressure. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H6DO)>Fuel>PROCEDURE>RELEASING OF FUEL PRESSURE .
- Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
- Open the fuel filler lid and remove the fuel filler cap.NOTE: This operation is required to release the inner pressure of the fuel tank.
- Disconnect the connector (A) and terminal (B) from the generator.
- Disconnect connectors (C) and (D) from A/C compressor, and remove the generator cord from clip (E).
- Remove the clip (F) securing the generator cord to the fuel pipe protector LH, and move the generator cord to the left side wheel apron.
- Disconnect the PCV hose.
- Remove the fuel pipe protector LH.
- Disconnect the connector (A) from the fuel injector, and remove the bolts securing the fuel injector pipe to the cylinder head.
- Remove the fuel injector while lifting up the fuel injector pipe.CAUTION:
- Be careful not to spill fuel.
- Catch the fuel from the pipes using a container or cloth.