LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2018 >> Outback 3.6R Limited >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control/Fuel System (H6DO) >> Fuel Pump Control Unit >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Pump Control Unit: Removal

  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the trunk trim panel assembly - side on the RH side. (Sedan model) Ref. to EXTERIOR/INTERIOR TRIM>Rear Quarter Trim>REMOVAL .
  3. Remove the right side rear quarter trim. (OUTBACK model) Ref. to EXTERIOR/INTERIOR TRIM>Rear Quarter Trim>REMOVAL .
  4. Remove the fuel pump control unit.
    • Sedan model
      G10263647Courtesy of SUBARU OF AMERICA, INC.
    • OUTBACK model
      G10263648Courtesy of SUBARU OF AMERICA, INC.
  5. Disconnect the connector from fuel pump control unit.
    G10263649Courtesy of SUBARU OF AMERICA, INC.