LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2018 >> Outback 3.6R Touring >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control/Fuel System (H6DO) >> Pulsation Damper >> Removal >> Pulsation Damper LH
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pulsation Damper LH

  1. Remove the collector cover.
    1. Carefully pull up the rear of collector cover at two positions (A).
    2. Carefully pull up the front of collector cover at two positions (B) while moving it forward.
      G11585612Courtesy of SUBARU OF AMERICA, INC.
  2. Release the fuel pressure. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H6DO)>Fuel>PROCEDURE>RELEASING OF FUEL PRESSURE .
  3. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  4. Open the fuel filler lid and remove the fuel filler cap.
    NOTE: This operation is required to release the inner pressure of the fuel tank.
  5. Disconnect the connector (A) and terminal (B) from the generator.
  6. Disconnect connectors (C) and (D) from A/C compressor, and remove the generator cord from clip (E).
  7. Remove the clip (F) securing the generator cord to the fuel pipe protector LH, and move the generator cord to the left side wheel apron.
    G12405116Courtesy of SUBARU OF AMERICA, INC.
  8. Disconnect the PCV hose.
    G10263604Courtesy of SUBARU OF AMERICA, INC.
  9. Remove the fuel pipe protector LH.
    G10263605Courtesy of SUBARU OF AMERICA, INC.
  10. Remove the pulsation damper LH from the fuel injector pipe LH.
    CAUTION:
    • Be careful not to spill fuel.
    • Catch the fuel from the pipes using a container or cloth.
    G10263750Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals