LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2018 >> WRX Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Vehicle Dynamics Control System >> Relay And Fuse >> Inspection >> Check Relay
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Check Relay

  1. Measure the resistance between relay terminals.
    TERMINAL NO. INSPECTION CONDITIONS STANDARD CIRCUIT
    1 - 2 Always 1 MΩ or more
    G08585558
    1 - 4 Always Less than 1 Ω
    1 - 2 Apply battery voltage between terminals 3 and 5. Less than 1 Ω
  2. Replace the relay if the inspection result is not within the standard value.
scientia non olet · About LEMON Manuals