VDC Control Module Parameter Reading

Perform reading of parameter.
1. Connect the Subaru Select Monitor.
  NOTE: For detailed operation procedures, refer to "Application Help".
2. Turn the ignition switch to ON.
3. On «Start» display, select «Diagnosis».
4. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».
5. On «Main Menu» display, select «Each System».
6. On «Select System» display, select «Brake Control System» and select «Enter».
7. On «Select Function» display, select «Work Support».
8. On «Work Support» display, select «Reading of parameter: ECM to SSM».
Save and close the file.