LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2018 >> WRX Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (Diagnostics - Introduction) (Except For STI) >> Drive Cycle >> Procedure >> Drive Cycle J
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Drive Cycle J

DTC Item Condition
P2610 ECM/PCM ENGINE OFF TIMER PERFORMANCE -

Diagnostic procedure: 

  1. Idle the engine for 15 minutes or more.
  2. Turn the ignition switch to OFF.
  3. After at least 10 hours passed from the start of step  2), read the temporary code using the Subaru Select Monitor or general scan tool. Ref. to ENGINE (DIAGNOSTICS) (EXCEPT FOR STI)>Read Diagnostic Trouble Code (DTC)>OPERATION .